Need of alignment test for a machine tool In plan and elevation, the tool must move in a straight line parallel to the workpiece’s axis of rotation.The axis connecting the centers of the headstock and tail stock must be...
The attachment is essentially made up of right-angle gear mechanisms that transfer power from the milling machine’s spindle to a vertical spindle with no change in speed. To temporarily convert a horizontal spindle, a...
Following are the factors affecting tool life. Cutting speedFeed and Depth of cutTool materialTool geometryWork materialNature of cutThe rigidity of the machine tool work systemCutting fluids Cutting Speed The most...
Cybersecurity Enabled by AI Cybersecurity companies are compelled to look for technological solutions to address the vulnerabilities due to the sharp rise in cyberattacks, email phishing scams, and ransomware. Millions of...
Motions in machine tools can be classified into the following categories: Motions for clamping the workpiece Depending on the size of the workpiece and the operation being carried out, the workpiece may be mounted on the...
Types of Machine Tools A large number of machine tools available can be classified in a number of ways as shownbelow: (1) Classification Based on the Desired Purpose General-purpose machine tools General-purpose...
Introduction:- Challenges for Six-Sigma Six Sigma isn’t without its own difficulties. As an extensive strategy that expects an obligation to persistent improvement, Six Sigma is in many cases seen as a costly or...
SUPPLIES AND COMPONENTS Arduino UNOBreadboard (generic)Jumper wires (generic)DC motor (generic)SparkFun Dual H-Bridge motor drivers L298Ultrasonic Sensor – HC-SR04 (Generic)Arduino Nano R3LED (generic)BuzzerTTP223B Touch...
Enhancements or improvements to normal human health, quality of life, performance, and usefulness are provided through human augmentation technology. These can include highly contentious changes to the human body or brain, as...
A compact yet well optimised three-axis accelerometer and three-axis gyroscope with temperature sensor. Let’s put it together with Arduino. Parts and materials Arduino UNODFRobot 6 DOF Sensor – MPU6050Oled...
Recent Comments