Motions in machine tools can be classified into the following categories: Motions for clamping the workpiece Depending on the size of the workpiece and the operation being carried out, the workpiece may be mounted on the...
Tag - machining process
Soil status monitoring and irrigation are the most fundamental aspects of “farm automation” or “smart agriculture.” The following features are required for agricultural soil status monitoring and...
Parts and materials Arduino Nano R32N3904 transistor2N3906 transistorFairchild semiconductor 1n4004. image 1N4007 – High Voltage, High Current Rated DiodeRotary potentiometer (generic)LED (generic)Pushbutton Switch...
When it comes to air pollution, dust and smoke are just one of the numerous factors to consider. Not only that, but wildfires have grown increasingly common in recent years as a result of climate change. According to a...
Introduction The removal of material from a workpiece is referred to as machining. The following are the machining categories. Cutting involves the use of single-point or multipoint cutting instruments, each having a...
Introduction Ultrasonic machining (USM) is the removal at ultrasonic frequencies[18-20 kilohertz (kHz)] of rough and fragile materials using an axially oscillating method. The abrasive slurry of B4C or SiC is continuously...
Machining removes some parts of the workpieces to change them into final parts, as stated earlier. Traditional, also called conventional, machining involves the presence of a tool that is tougher to machine than the workpiece...
From the soonest of times techniques for cutting materials have been received utilizing hand devices produced using bone, stick, or stone. Afterward, hand instruments made of rudimentary metals, for example, bronze and iron were...