HARDWAREArduino Nano R3GP2Y1014AU0F Sensor0.96’ SPI OLED Display Module220 µf CapacitorThrough Hole Resistor, 150 ohm Summery Let’s use the Sharp GP2Y1014AU0F Sensor to calculate the Dust Density in the...
Tag - arduino projects
The guitar controller is split into two sections: left-hand and right-hand controllers. The player may adjust the pitch of the tone by bending his fingers and pressing the glove on the left-hand controller. The right-hand...
In this project, we’ll use an Arduino to connect with a Gravity Infrared CO2 Sensor to calculate CO2 concentration in PPM. HARDWARE : Arduino Nano R3Gravity Infrared CO2 Sensor V1.1Jumper wires (generic)0.96’...
SUPPLIES & COMPONENTS Arduino UNOBreadboard (generic)Jumper cables (generic)Potentiometer that rotates (generic)SparkFun Pushbutton switch 12mmLED (generic)221 ohm resistorCapacitor 10 µFServos (Tower Pro MG996R)10k ohm...
SUPPLIES AND COMPONENTS Arduino UNOUltrasonic Sensor – HC-SR04 (Generic)Relay Module (Generic)Jumper wires (generic)Breadboard (generic) INTRODUCTION TO THE PROJECT How to build anything that is...
SUPPLIES AND COMPONENTS Arduino UNOEspressif ESP8266 ESP-01 ONLINE SERVICES AND APPLICATIONS Blynk Hardware requirements: Arduino UnoJumper cablesSolderless breadboardUSB 2.0 cable type A/B to connect the...
COMPONENTS AND SUPPLIES Arduino UNOSparkFun Pushbutton switch 12mmLED (generic)BuzzerResistor 330 ohmBreadboard (generic)Jumper wires (generic) APPS AND ONLINE SERVICES Arduino IDE What is Morse Code and how does...